GMC Archives

2012 GMC Sierra
Mileage
213,629
Service Date
9/16/2026
Services Performed
Changed Motor Oil & Replaced Filter, Added Factory Recommended Amount 5W30 Castrol Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
Replace engine air filter
Remove front disc brake pads and rotors. Replace calipers, hoses, disc brake pads and disc brake rotors. Bleed air from system and road test vehicle.
Bill W. gave our service a 5 star review on 9/16/2026
2025 GMC Sierra 1500
Mileage
13,770
Service Date
7/1/2026
Services Performed
Changed Motor Oil & Replaced Filter, Added Up To 5 QTS 0W20 Drydene Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
Rotate tires and set tire pressure.
Jason B. gave our service a 5 star review on 7/1/2026
2020 GMC Sierra 1500
Mileage
91,691
Service Date
6/24/2026
Services Performed
Changed Motor Oil & Replaced Filter, Added Up To 5 QTS 0W20 Drydene Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
Lou M. gave our service a 5 star review on 6/24/2026
2023 GMC Canyon
Mileage
46,451
Service Date
6/19/2026
Services Performed
Check for codes and found code P3075 present for insufficient coolant flow. Check coolant pump flow specs and found to be low. Also noted that data showed cooling fans commanded off but are clearly running. As vehicle continued to run found that electric water pump came up to spec and was working properly. Pressure test cooling system and found upper radiator hose quick disconnect causing coolant leak and allowing air pockets to form in cooling system. Replace upper radiator hose assembly and top off coolant as needed. Clear code and recheck operation – ok at this time.
Lou M. gave our service a 5 star review on 6/19/2026
2022 GMC Sierra 2500 HD
Mileage
107,891
Service Date
6/1/2026
Services Performed
Changed Motor Oil & Replaced Filter, Added Up To 5 QTS 0W20 Drydene Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels Customer supplied own oil
Rotate tires and set tire pressure.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Visually inspect hoses, clamps, and belt, also pressure test cooling system for leaks. Drain and fill radiator with up to 1 gallon Of O-E eqivelent antifreeze.
Can hear noise slightly- not able to pin point at this time
Chris M. gave our service a 5 star review on 6/1/2026
2023 GMC Canyon
Mileage
46,451
Service Date
6/19/2026
Services Performed
Check for codes and found code P3075 present for insufficient coolant flow. Check coolant pump flow specs and found to be low. Also noted that data showed cooling fans commanded off but are clearly running. As vehicle continued to run found that electric water pump came up to spec and was working properly. Pressure test cooling system and found upper radiator hose quick disconnect causing coolant leak and allowing air pockets to form in cooling system. Replace upper radiator hose assembly and top off coolant as needed. Clear code and recheck operation – ok at this time.
Lou M. gave our service a 5 star review on 6/19/2026
2018 GMC Sierra 3500 HD
Mileage
44,489
Service Date
11/7/2025
Services Performed
Remove front disk brake pads and rotors. Clean all caliper slides, replace disk brake pads and disk brake rotors. Bleed air from system and road test vehicle.
Charles H. gave our service a 5 star review on 11/8/2025
2019 GMC Sierra 1500
Mileage
61,927
Service Date
9/29/2025
Services Performed
Changed Motor Oil & Replaced Filter, Added Up To 5 QTS 0W20 Drydene Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
Dan L. gave our service a 5 star review on 10/1/2025
2004 GMC Sierra
Mileage
202,285
Service Date
11/18/2022
Services Performed
Changed Motor Oil & Replaced Filter, Added 5 QTS Standard Motor Oil, Lube Chassis, Check all Fluid Levels and adjust tire pressure
Joe B. gave our service a 5 star review on 11/18/2022
2004 GMC Yukon XL
Mileage
97,321
Service Date
9/9/2022
Services Performed
Removed rear wheels. Found rear brakes worn out, and metal to metal. Removed calipers, pads, and rotors. Installed new calipers, pads, and rotors.
Removed front wheels. Found brake pads not making contact with rotors. Removed calipers, pads, and rotors. Found front brake hoses rusted, and seized onto calipers. Installed new brake hoses, calipers, pads, and rotors. Bleed brake system.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Gerald D. gave our service a 5 star review on 9/14/2022